Home
Our Story
Links
Warranty
Testimonials
Site map

PRODUCTS
Overseas Slots
Las Vegas Slots
Pachinko
Antique Slots
Tokens & Extras
Slot Stands
Cherry Masters
Currency Counters
Terms
Pedal Cars and Planes

LATEST NEWS

CONTACT US

  
slot machines

WARNING

Slot Machine (also know as Pachi-slo)

YOU (THE BUYER) AGREE THAT BY PURCHASING ANY OF THE SLOT MACHINES THAT YOU WILL NOT USE THEM FOR THE PURPOSE OF GAMBLING OR COMMERCIAL USE IN ANY WAY/SHAPE/OR FORM WHAT SO EVER. THESE MACHINES ARE FOR PRIVATE IN HOME USE ONLY

AND ARE BEING SOLD AS JUST THAT. DON'T USE THESE MACHINE FOR GAMBLING OF ANY KIND...

  • This is a Game of Skill "Skill Stop" not a element of chance.
  • Skill entitle the player to replay no more than 15 free replays (token) without entering token again
  • Token has no Cash value

DO NOT USE THESE FOR GAMBLING OF ANY KIND.....

Here are the directions to convert to quarters. It is very easy to do and should only take about 5 minutes. When you are done it will accept and payout either tokens or quarters BOTH.


Note : If your Coin mechanism looks different than the one below then here is another method for Universal Type Slots further down the page





Click for Service & Support




View Cart


ExactBanker 9 000
Money Counter

ExactBanker 9000 Bill Counters
Great Price:
Was $375
NOW $199
Special Sale Price
  
View Cart
Ships in 48 Hours of order receipt or less

Search this site




Step 1: Power on the machine.

Step 2:
Open the front of the machine and look at the back of the front door. You will see a slide the coins ride down.

NOTE: if power is off then all coins are rejected. Also if you already inserted three coins and are not in credit mode all after the third coin are rejected until you play it out.

Step 3: Drop in a few tokens and watch them ride down the slide. Then drop a few quarters and watch them fall out the back of the slide. The reason they fall out the back is because they are slightly shorter than the token and the square hole cut out in the slide allows the top edge of the quarter to fall out and not the token.
Step 4: You need some ordinary every day type scotch tape like that shown here. not the fancy pancy cloudy looking "magic" tape. It needs to be the old fashioned type CLEAR scotch tape. The kind Grandma used to have.
Step 5: Power the machine OFF. Then lift up on plates 1 and plate 2 with one hand and slide a 21/2 inch piece of scotch tapeunder the plates and across the front TOP of the square hole so that the top of the quarter will slide along it instead of falling out.
Congratulations, you are done, Power back on and make sure it accepts quarters and tokens !

 

Quarter Conversion for Universal and Aruze Type Pachislos

Using your key, open the front of the machine and locate the coin mechanism as shown in Fig. 2.

Disconnect the plug (Fig. 2) and then lift the lever on the left of the mechanism (Fig. 2) to remove it from the machine as shown.

As shown in Fig. 3, gently squeeze the sides of the black plastic cover to remove it.

In Fig. 4 you will see the metal bottom rail which you must adjust upward in order to prevent the slightly smaller quarters from falling out.

Turn the unit over and you will see the two adjustment screws as shown in Fig. 5. Loosen both screws and center them in their respective slots. When properly adjusted, there should be a very small lip between the metal track and the plastic side lip. Some adjustment may be necessary for reliable feeding.

You will also notice that I added a small strip of plastic along the bottom rail to ensure reliable feeding. I used hot glue to attach this strip. I found that after some trial and error adjustments that this strip wasnít needed, but itís up to you if you want to add it.

 
  • Before reassembly, get a quarter or two and while holding the metal top rail in itís closed position (with the mechanism in the normal upright position) try feeding quarters through the slot. They should, if adjusted properly, continue out to the right side of the mechanism, NOT fall out the front. As stated previously, some minor adjustment may be necessary.
  • Find the tabs on the plastic cover, which was removed in step 3. Gently snap the tabs back into place. Use the photos as a reference.
  • If itís not already open, open the front of your slot machine. Then, insert the small pegs on the right side of the mechanism. Then snap in the other side. Give it a little wiggle to make sure itís properly seated.
  • Re-insert the plug into the proper socket. Be sure to turn it the right way before insertion. It will only go one way, so DO NOT force it!!
  • Close up your machine and get a handful of quarters. Then have fun! If the machine is properly adjusted, EVERY quarter should feed correctly. Tokens will also still work.
  • We prefer PAYPAL . The most secure way to pay that there is !
    Comments to: sales@slotsdirect.com Mitchell Enterprises
    TEL:(610) 687-5884 FAX: (610) 288-8579 © 1999 Mitchell Enterprises All Rights Reserved.