Your ultimate
source for Casino Slot Machines, Pachinko Machines, Tokens, balls, game stands,
Antique Slot Machines and other fine gameroom products. Customer Satisfaction
is our FIRST Priority.
You
can woodgrain your Pachislo slot machine for less than $3
Let me tell
you how!
Here
is what you need to buy
* One Good razor cutter. Dont be tempted
to use an old dull one . * One Plastic Putty knife 3 inces wide * One
roll wood grain contact paper. I found it a Home Depot in a 24 foodt roll for
$5 which will do 2 machines
Step
1
Start
at one side and unroll the paper all the way across the top and down the oposite
side. Leave 3 inches excess at the bottom on both sides and cut it off.
Step 2
Temporarily
scotch tape the paper to line up on the front edge all the way around. Use removable
scotch tape, not the permanent type. Don' worry about covering the hinge on the
left side, we will trim that later.
Step
3
Start at the bottom
of one side and bein peeling the backing and pushing up and smoothing with the
putty knife as you go to smooth out any wrinkes or air bubbles. Work your way
up the side, across the top and down the other side. Smoothing as you go.
Step 4
Trim
with the razor knife all the way around and then trim around the hige on the hinge
side. It is optional if you want to cut away the hand holds on both sides. I prefer
to leave them covered.
Step
5
There,
wasn't that easy ?
Now, you still have enough left over to cover the
NEXT machine you buy from me !!